Shenzhen Natywish Technology Co., Ltd.
Shenzhen Natywish Technology Co., Ltd.
Add to Cart
10 ports POE ehternet switch with 8 POE ports , 2 gigabit ethernet ports , each POE ports
15.4W for monitoring camera
What is Power over Ethernet?
Power over Ethernet (POE) is a technology that lets network cables carry electrical power.
For example, a digital security camera normally requires two connections to be made when it is installed:
A network connection, in order to be able to communicate with video recording and display equipment
A power connection, to deliver the electrical power the camera needs to operate
However, if the camera is POE-enabled, only the network connection needs to be made, as it will receive its electrical power from this cable as well.
Why use POE?
Specifying Power over Ethernet brings many advantages to an installation:
Time and cost savings - by reducing the time and expense of having electrical power cabling installed. Network cables do not require a qualified electrician to fit them, and can be located anywhere.
Flexibility - without being tethered to an electrical outlet, devices such as IP cameras and wireless access points can be located wherever they are needed most, and repositioned easily if required.
Safety - POE delivery is intelligent, and designed to protect network equipment from overload, underpowering, or incorrect installation.
Reliability - POE power comes from a central and universally compatible source, rather than a collection of distributed wall adapters. It can be backed-up by an uninterruptible power supply, or controlled to easily disable or reset devices.
Scalability - having power available on the network means that installation and distribution of network connections is simple and effective.
10 ports 10/100/1000M POE Switch is a Gigabit POE Switch,Which is cost-effective provide network layout need to simplify wireless access point (AP) and IP-based surveillance cameras network cameras in order to install in commercial network and home network. The devices far away from power socket are very suitable for hanging on the wall or ceiling. PoE eliminates the need for connecting these devices to power socket. So it make more flexible for those difficult to connect with AC power socket, and cut down the installation cost. It is ideal choice for those want to deploy a small commercial network and home network that use wireless access point (AP) and IP-based surveillance cameras.
Features
◆ IEEE 802.3af power on up to 8 ports
◆ Supply power to wireless access points and surveillance cameras over Cat-5 cabling
◆ 10*10/100/1000 Mbps Ports with AutoUplink™
◆ Supports PoE power up to 15.4W for each PoE port
◆ Supports PoE power up to 150W for all PoE ports
◆ Supports PoE IEEE 802.3af compliant PDs
◆ Supports IEEE 802.3x flow control for Full-duplex Mode and back pressure for Half-duplex Mode
◆ 1K entry MAC address table of the PoE Switch with auto-learning and auto-aging
◆ LED indicators for monitoring power, link
◆ Support Vlan and Extend Function
◆ Internal power adapter supply
Specification
| Technical parameter list | |
| Product Name | 10-Ports AF PoE Switch with 8 PoE Ports and 2 Gigabit Uplink |
| Connector Type | 10* 10/100/1000M copper cable RJ45 ports(8 PoE ports+2 Uplink) |
| Network Media | 10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or more UTP (≤100 meter) |
| Bandwidth | 20Gbps (non-blocking) |
| Address Database Size | 8K |
| MTBF | 190,000 hours (about 21 years) |
| Forwarding Mode | Store-And-Forward |
| Network Protocols |
IEEE 802.3i 10BASET; IEEE 802.3u 100BASETX; IEEE 802.3x Flow Control; IEEE 802.1af DTE Power via MDI; IEEE 802.3af |
| LED Display | System: power supply; Every Port: connecting, PoE working status |
| Power Supply | Power input: AC100-240V 50/60Hz; (every country use a custom power plug) |
| PoE Ports | Port 1-8 support POE |
| PoE Port Power | 15.4W for each POE port |
| PoE Standard | IEEE 802.3af |
| Led indicator |
Green: Ethernet Red:PoE |
| Working Environment |
Operating Temperature: -20° ~ 55 ° C; Storage Temperature: -40 ° ~ 85 ° C; Operating Humidity: 10% ~ 95%, non-condensing |
| Certification | CE Mark ,commercial; CE/LVD EN60950, RoHS |
| Radiation | CE mark, commercial; FCC Part 15 Class B; VCCI Class B; EN 55022 (CISPR 22), Class B |
| Transmission Distance | Data transmission distance: 100m |
| Warranty | 3 year warranty(1 yeas warranty for power adapter) |